B2B Procurement Solutions
Stone Solutions for Trade Buyers
Practical sourcing guides built on our real production rules: how batches, drawings, finishes and logistics are controlled for countertops, vanity tops, pool coping, stone tables and travertine tiles — organized by product category so each solution leads to the right products and a contextual inquiry.
Countertops
View category
Black Marble Vanity Tops: Approved Under Real Lighting, Finished for Daily Use
Dark stone magnifies every flaw a light vanity top forgives: water marks, tone drift between lots and veining broken at the cutout. We check candidate dark lots under real lighting, specify honed finishes for wet zones and batch-match multi-room programs.
Custom Marble & Granite Countertops: One Factory, One Batch, One Layout
Why countertop orders fail on mixed batches — and how one factory, an approved actual-slab layout and CNC templating keep a marble kitchen island, the counters and the backsplash reading as one installation.
Custom Marble Vanity Tops Built From Real Basin and Tap Drawings
On a bathroom vanity top the cut-outs are the product. Same-day shop drawings against actual slabs, CNC-machined openings and piece-by-piece inspection keep 36 inch single tops and 60–72 inch double vanities installable the week they land.
Granite Countertop Supply: Graded Lots, Batch Photos, Schedule Release
Most granite countertop supply fails between containers, not at the factory gate: ungraded lots, drifting base tone and no batch identity. We grade slabs at the quarry, document every container and release against your schedule.
Outdoor Stone
View category
Limestone Coping: The Edge Is a Detail, Not a Line Item
Coping is the finished edge of the landscape — and the first place tone mismatch, missing drip details and stock profiles show. We approve every profile on a section drawing and cut coping, steps and caps from the same slab run as the field.
Black Granite Paving: An Engineered Surface, Not a Square-Metre Price
Granite paving fails at the wheel paths and the first winter, not at the quarry. We specify thickness by duty, finish by exposure and cut the whole network — driveway, walkway, terrace, steps — from one graded lot.
Travertine Pool Tiles: One Calibrated Lot, Four Specified Zones
Pool surrounds fail in the zones, not the stone: deck, coping, steps and waterline each need their own finish and thickness. We allocate all four zones from one calibrated lot with a written sealing regime.
Granite Pool Coping & Outdoor Stone Supplied as One Matched Batch
Mixed-batch coping lines read as a set of compromises. We allocate one slab batch for the full pool — coping, surround and decking — with CNC-profiled bullnose edges, calibrated thickness and slip-resistant flamed finishes.
Stone Tables
View category
Outdoor Marble Dining Tables: Specified Against the Weather
Outdoor dining fails on specification, not stone: fading composites, wind-tipped light tables and material breaks beside stone paving. We match the stone family to the exposure, the base weight to the wind and write the care routine down.
Marble Top Counter Height Tables: The Stools Are Half the Order
A counter-height table is half a product without its seating spec: stool heights, knee clearances and laminated edges for high-top contact. We ship the seating set as one specification, not a top that hopes the stools fit.
Marble Table and Chairs: Sets That Work When People Sit Down
A stone table is only as good as the chairs around it: blocked push-back, caught arms and lost seat counts are pairing failures, not stone failures. We engineer base footprints and chair clearances into every format and allocate set pieces from the same slabs.
Marble Pedestal Dining Tables: The Contact Zone Is the Product
A pedestal top concentrates every load on one contact zone — which is why unengineered pedestals flex and tops crack in transit. We engineer the contact zone, approve the pattern before the cut and freight tops and bases separately.
Marble Bar Tops: Vein-Planned Sections Approved Before the Cut
Bar tops run long, turn corners and step up — which is exactly where unallocated slabs fail. We allocate every section from vein-matched slabs and approve each joint on placement images before cutting.
Stone Dining Tables: Pattern Placement Approved on the Actual Slab
A stone dining table is judged at close range every day. We lock pattern placement on the image of the actual slab before the first cut, so the table the client approved is the table in the container — and a dining set reads as one stone, not three.
Interior Stone
View category
Tumbled Marble Tiles: The Aged Read, Done Honestly
Tumbled stone buys a process, not just a texture: wider joints to approve, sealing to specify, and mixed-finish programs that drift without one-lot discipline. We tumble for real, seal in writing and keep finishes in one family.
Granite Tile Flooring: Traffic-Ready, Calibrated, Documented
Granite floors are bought for traffic — the supply questions decide the rest. We calibrate 12 x 12 in and 12 x 24 in modules on one line, document the lot before cutting and reserve continuity for phased programs.
Beige Limestone Tiles: Buy One Beige, Not Two
Beige shows lot drift hardest: two beiges at a return wall are two purchases. We cut floors, walls and wet zones from one documented lot, with finishes and the sealing regime specified per zone and in writing.
Marble Herringbone Floor Tile: The Layout Is the Product
Herringbone advances diagonally, so an unplanned field dies in slivers at the walls and multiplies every lot mismatch. We draw the layout — starting line, border course, transitions — before production and cut every module from one calibrated lot.
Marble Tile Supply: Lot-Mapped Fields, Calibrated on One Line
Marble tile orders fail by lot, not by module: uncontrolled lots arrive as a patchwork once fixed. We map the lot, calibrate on one line and pack crates in laying order — so the field reads as one stone.
White Travertine Tiles: Declared Hole Treatment and ±0.5 mm Calibration
Travertine is a porous stone, and unspecified hole treatment plus loose thickness tolerances turn routine tile orders into site disputes. We declare the finish and calibrate every tile to ±0.5 mm so the floor that installs is the floor you specified.
Stone Sinks & Tubs
View category
Marble Bathroom Sink Tops: The Drawing Decides the Cut
A bathroom sink top fails on the drawing chain, not the stone: cutout off the bowl, tap holes off the faucet, tops off the cabinet run. We cut against your shop drawings, batch per unit type and inspect side by side before packing.
Stone Freestanding Baths: The Weight Is the Program
A stone freestanding bath succeeds when weight, plumbing and material are confirmed before the first cut. We lock the profile in a buyer-approved 3D model, provide loading figures for your engineer and match the block to the room's stone palette.
Marble Double Sinks: Two Bowls, One Model, One Block Set
A double sink fails when its two bowls come from two orders. We carve both from one buyer-approved 3D model and one matched block set, drill drains to your plumbing drawing and inspect the pair side by side before packing.
Natural Stone Slabs
View categoryMarble Import Program: The Container Is the Easy Part
Importing marble is a documentation and lot-discipline program: the container must clear customs, the stock must match across years, and trials must not cost three containers. We ship the documentation chain with the stone.
Granite Slabs Wholesale: You Approve the Lot, Not the Catalogue
Wholesale slab buying is a lot-discipline decision: approve the actual slabs, consolidate containers to fill the load and reserve lot continuity for phased programs. We quote with slab-by-slab photos and scans, not catalogue images.