Apexstone Amoy Marble and Granite

Procurement Solution

Granite Slabs Wholesale: You Approve the Lot, Not the Catalogue

Wholesale slab buying is a lot-discipline decision: approve the actual slabs, consolidate containers to fill the load and reserve lot continuity for phased programs. We quote with slab-by-slab photos and scans, not catalogue images.

Full-size granite slabs in gang saw format staged for wholesale container loading

The buyer's pain point and our technical solution

Buying granite slabs wholesale is a commitment to what is inside the crate, not the catalogue photo next to the price. Fabricators and contractors buying wholesale slabs run into three recurring failures: slabs approved from stock images that arrive as a visibly different lot, containers that leave money behind because a single stone cannot fill the load, and phased projects where container three drifts from container one because nobody reserved the lot. A wholesale program is a supply relationship — the lot discipline matters as much as the price per square metre.

What that costs the buyer

A drifted lot strands fabrication: yield assumptions built on one slab's usable zone collapse on another, and cladding phases that mismatch reopen an acceptance file the contractor had closed. Half-empty containers raise landed cost per square metre on every single-stone order.

Our solution: slab-by-slab documentation, consolidated loads, reserved lots

  • The actual lot, documented: slab-by-slab photos and high-definition scans (≥300 dpi through our StoneGPS archive) are part of the quotation — you approve the real slabs before they ship.
  • Consolidated containers: mixed-family loads fill the container and cut landed cost; slabs are documented per family so receiving sorts on arrival.
  • Lot continuity in writing: repeat and phased programs reserve the lot family; later containers draw from it with batch photos per shipment, keeping phase two matched to phase one.
  • Book-matching on real pairs: feature-wall pairs are selected and approved on scans, crated together and inspected as a set — available on selected slabs, confirmed at selection stage.
  • Program range: gang saw slabs in 18/20/30 mm (3/4 in, 3/4 in, 1-1/4 in), polished, honed or flamed; MOQ from 50 m² (about 538 sq ft) per thickness/finish combination.

Value for the buyer

You buy slabs the way fabrication consumes them — documented lots, reserved continuity, loads that arrive full and sorted — instead of catalogue promises that become yield disputes.

Documented project cases

  1. Container-consolidated slab program for a fabricator

    Client / commission
    Countertop fabricator, North America
    Stone used
    Mixed wholesale granite slab container: two granite families consolidated to fill one load
    What it solved
    The fabricator needed two stones in production without paying for two half-empty containers
    Before
    Single-stone orders left container space unused and raised the per-square-metre landed cost
    Now
    Both families consolidated into one documented load with slab-by-slab photos; production continued on both stones from a single arrival
    Where the data comes from
    Company order records and fabricator correspondence

  2. Repeat lot continuity for a hotel fit-out

    Client / commission
    Hotel interior contractor, Middle East
    Stone used
    Granite slab lots reserved across phased purchases for wall cladding and vanity counters
    What it solved
    Phased projects need later containers to match the first lot; spot-market buying had previously produced visible drift between phases
    Before
    Phase two slabs from the open market read visibly different against phase one cladding
    Now
    Later containers drawn from the reserved lot family with batch photos per shipment; phases matched and the acceptance file closed without rework
    Where the data comes from
    Project order file and contractor acceptance records

  3. Book-matched feature wall from selected slabs

    Client / commission
    Design-build contractor, residential project
    Stone used
    Book-matched granite slab pair selected for an entrance feature wall
    What it solved
    Book-matching requires selecting the actual slab pair before purchase; catalogue photos cannot confirm the mirror effect
    Before
    A pair bought from photos arrived mismatched and was sold at a discount
    Now
    Slab pair selected and approved on actual slab photos and scans before shipping; the wall read as one mirrored composition
    Where the data comes from
    Company pre-sales records and project order file

Client reviews and ratings

Client reviews on file for wholesale slab programs (star ratings drawn from our order records and follow-up notes):

  • ★★★★★

    Countertop fabricator: “One consolidated container covered both stones and the slab photos matched what we uncrated — yield planning stopped being guesswork.” Verifiable result: mixed-family container filled the load and both families entered production from one arrival (source: fabricator correspondence and order records).

  • ★★★★☆

    Hotel interior contractor: “The reserved lot held across three phases; scheduling shipments against our installation sequence needs coordination.” Verifiable result: phased cladding matched across containers with batch photos per shipment (source: contractor acceptance records).

  • ★★★★★

    Design-build contractor: “Approving the book-matched pair on scans before purchase is the only way to buy feature walls — the mirror effect was exactly what the scans showed.” Verifiable result: slab pair approved on scans and installed as one mirrored composition (source: pre-sales records and project order file).

Certificates and compliance records

  • ISO-certified production processes

    Gang saw cutting, resin treatment, calibration and pre-shipment inspection for slab programs run under our documented ISO-certified process controls; certificate scope and validity are provided with quotations on request.

    ISO-certified production processes

  • Material standards per company records

    Our sourcing documentation lists standard-compliance records for granite selections in the physical requirement ranges our order files reference. Standards documents are provided with quotations on request; we do not claim certification beyond what is on file.

Company strength

Apexstone Amoy Marble and Granite, founded in 2002, exports to 42 countries from Xiamen, China. Wholesale slab supply runs through our Shuitou hub — 2,400+ natural stone types with 85% direct quarry buying from China, Italy, Turkey, Iran, Brazil, Spain and Portugal — with gang saw cutting, resin treatment, calibration and slab-by-slab documentation under ISO-certified process controls.

R&D includes the StoneGPS.cn platform, developed over three years, which archives high-definition slab scans (≥300 dpi) searchable by stone type, origin, colour and vein — the tooling behind slab selection and lot matching for wholesale buyers. The StoneBooks reference collection, commissioned by Harvest Asia Pacific (Hongkong) Ltd., is used by institutions including Cendes Design Studio, Shanghai Institute of Visual Art (Fudan University), National Cheng Kung University and the National Taiwan Museum.

Exhibition record since 2005 includes Coverings (USA), INDO BUILD TECH (Jakarta) and the Xiamen International Stone Fair. Company profile figures: 51–200 staff, USD 20M annual revenue scale, selection by six-star hotels documented in the company profile.

Related products

Scope your wholesale slab program

Fabrication target
Order pattern

Select an option in each group to see the matching production rule.

Procurement FAQ

What does wholesale slab buying actually include?
Gang saw slabs documented slab by slab: photos and high-definition scans of the actual lot, thickness and finish confirmation, batch photos per shipment and lot continuity in writing for repeat programs — not catalogue images standing in for the load.
Can I consolidate different stones in one container?
Yes — mixed-family containers are a standard part of wholesale supply, consolidated to fill the load and reduce landed cost per square metre. Slabs are documented per family so your receiving team can sort on arrival.
How do you keep later containers matching the first lot?
Repeat programs reserve the lot family in writing; later shipments draw from the reserved family with batch photos per shipment, so phase two matches phase one and your acceptance file stays closed.
Can you supply book-matched pairs?
Yes — pairs are selected and approved on scans of the actual slabs before purchase, crated together and inspected as a set. Book-matching is available on selected slabs and confirmed at selection stage.
What thicknesses and finishes are standard?
Slabs run in 18 mm (3/4 in), 20 mm (3/4 in) and 30 mm (1-1/4 in), finished polished, honed or flamed; availability varies by stone and is confirmed per lot at quotation.

Request wholesale slab availability with lot continuity

Send the stone families, monthly volume and the applications you fabricate for. We reply with current lot availability, slab-by-slab photos and scans, and a consolidated container plan — lot continuity reserved in writing.

▸ Submit Inquiry

FORM · REV.1
Product Inquiry
Granite Slabs Wholesale: You Approve the Lot, Not the Catalogue (solution: granite-slabs-wholesale)